G64Device Versions

This document is generated by CsDocVer 18-12-2024 - 14:36

Version: 1.48.810.212 (TW - 2024-09-25):

New features:

• CrateConvBase device's initialisation direction naming is not logical (INIT_MODE_DEVICE) - Changed to HwUnit - Define constants in replaced by enum class types - elog entry 2858

Version: 1.47.798.211 (TW - 2024-09-12):

Correted bugs:

• When When G64 crate has been turned off/on, daf controlled parameters goes to -Full scale (-15A) - Caused by setting dynamic with no DAF loaded - elog entry 2847

Version: 1.45.371.210 (TW - 2022-03-30):

Correted bugs:

• G64 (on table conversions) have shortly invalid data shown as valid - elog entry 2353

Version: 1.44.273.209 (TW - 2021-09-22):

Correted bugs:

• Requesting CsLog2020 status data from Resto to G64 => CPacketServer throws an exception - elog entry 2268

Version: 1.39.1669.208 ( - 2019-03-28):

Correted bugs:

• CSerialBaseCrate - error/status messages history/last message does not work as intended - elog entry 2016

Version: 1.39.1553.207 ( - 2018-03-01):

New features:

• G64 DAF operation mode control - historis implemented

Correted bugs:

• Implemented histories on all Daf mode control and status

Version: 1.39.1530.206 ( - 2018-01-22):

Correted bugs:

• CSerG64Crate: Sometimes communication to G64 is not started at consysloader startup. - elog entry 1835

Version: 1.37.1416.205 ( - 2017-05-24):

Correted bugs:

• G826 - Communication - continuesly restart communication - elog entry 1832

Version: 1.37.1414.204 ( - 2017-05-23):

Correted bugs:

• Serial G64 device fails when starting device 811, crate G811 on FEC14, I1

Version: 1.37.1386.203 ( - 2017-03-30):

Version: 1.37.1369.202 ( - 2017-02-09):

Correted bugs:

• CSerG64Device: Writing of values sometimes delayed several seconds - elog entry 1791

Version: 1.37.1358.201 ( - 2017-01-30):

Seriel G64 Device - First release version finished

Version: 1.37.1320.200 ( - 2016-11-23):

Correted bugs:

• CVacuumControlDevice - could not start connection if first crate in daise chain was dead - elog entry 1753

Version: 1.37.1313.199 ( - 2016-11-07):

Correted bugs:

• CVacuumControlDevice: Release of control buttons has stopped working - elog entry 1749

Version: 1.37.1295.198 ( - 2016-09-14):

Correted bugs:

• CVacuumControlDevice: UpdateValidFlags failed when SetConnectionBroken() called

Version: 1.36.1278.197 ( - 2016-08-12):

Correted bugs:

• CVacuumControlDevice connection often fails and reconnects later by itself

Version: 1.36.1277.196 ( - 2016-08-11):

Correted bugs:

• CVacuumControlDevice - no read history on crate bits/words

Version: 1.35.1226.195 ( - 2016-05-18):

Correted bugs:

• CVacuumControlDevice - Matline controller fails when both units are connected and trying to open/close a valve - elog entry 1680

Version: 1.35.1223.194 ( - 2016-05-11):

Version: 1.35.1208.193 ( - 2016-04-13):

New features:

• New device for standalone vacuum G64 - elog entry 1650

Version: 1.31.394.192 (tw - 2010-11-16):

New features:

• Active update state update rate is reduced to max 1 pr 10 second - instead of prev where updated at full update rate.

Correted bugs:

• Updated error and log messages - more informative text. Include doct and channel number.
• PCDoct - handling and error logging when PC doct is not working correctly. - elog entry 908

Removed G64Crate.h, CG64Crate.cpp from project. Was not used. Removed unused code in PcDoct.x Removed Assert for read/write errors when no hardware pressent. The error is logged in the program log.

Version: 1.28.310.191 ( - 2009-11-23):

Removed PCDoct device code from code (Commented out in this version)

Version: 1.28.310.190 (tw - 2009-11-23):

First version with svn version control and code generated version numbers.

Version: 1.26.146.189 (tw - 2008-10-02):

Last version under Ragnarok version control

Last Modified 18 December 2024